Learning about industrial marine design Learning about industrial marine design

If you have a building project that requires some intricate metal fabrication, you'll want to ensure that you employ the best manufacturing process possible. If your job is ongoing, you'll also want to use a reliable, predictable and relatively cost-effective technique and, in this instance, should have a close look at laser cutting. Why could this be the answer to your problems?

How It Works

Laser cutting processes have been used across a variety of industries where the highest quality and intricate cuts are crucial. This process applies an extremely focused and powerful beam of light at the sheet metal in question that will effectively melt or vaporise the surface in short order. Typically, the process is controlled by a CNC program and can be repeated with impressive accuracy every time. The laser-cutting process will always come out on top, no matter how complicated the task in question.

Speed and Efficiency

In addition, these machines operate at very high speeds. This means that your job can be finished as quickly as possible to reduce any lead times. The CNC machine can also be reprogrammed very quickly to move on to the next programme with minimal delay. This may be attractive to you if you have a multistage cutting process in mind.

Minimising Wastage

Wastage is always a consideration when working with sheet metal. However, the good news here is that the laser will work with such high precision that it will not damage or warp the surrounding areas. The heat-affected zone is minimal, and this will lead to much less wastage and lower cost.

Outsourcing Your Requirement

However, due to the cost associated with buying and configuring these machines and the special knowledge required to run and program CNC, it's usually best to outsource your requirements. This means that you'll be able to take advantage of these laser-cutting benefits without considerable capital expenditure. These third-party operators will also create a safe working environment for these machines and take into account any potentially dangerous gases fumes made when the machine is in use.

Great for Building Development

Laser cutting is your best bet if, for example, you need to fabricate ducting systems for HVAC installation across a new housing development. These machines will be able to fabricate each installation to the appropriate specification and create solutions for each property in a short space of time.

Outsourcing Your Requirement

Reach out to a professional who works with metal so you can satisfy your sheet metal fabrication requirements.